Brand new UPR Aerospace Racing Billet Oil Breather Tank for your street or race engine. Designed to allow remote mounting of your engine breather away from the engine and exhaust. Configured with your choice of single or dual inlets with -8, -10, -12 or 5/8" Plug N Play fitting(s) of your choice. Includes billet mounting bracket and screw in breather filter. Designed to provide the best oil control without any questions. 100% CNC machined Oil Separator System provides the most sure fire way to eliminate any chances of oil getting into your inter-cooler and intake tract since there is no connection to intake vacuum or air inlet tubes. Ideal for race cars of all types or if you are running a Vortech, Paxton, Procharger, or Turbo kit with inlet screens only. UPR Breather tanks are easy to drain with either the provided petcock or you can unscrew the containment cup to drain, inspect and clean the contents out. You can't do that with those over priced welded up breather tanks! Can be used with or without a vacuum pump. The breather filters are easily cleaned with just warm water and dish soap. Can be used for Crankcase, rear axle or transmission vent.
Installs in 20-30 minutes or less.
Optional Parts:
Replacement Breather Filter:
Spare filter is a good thing to keep on hand. If original filter gets dirty and needs to be clean it can be swapped out and then cleaned at your convenience.
Replacement O-Rings:
Spare O-rings for the breather cup. If the O-ring is lost, torn or if it's just time to replace it due to wear it's a good idea to have a couple of spares in the glove box.
Drain Line Kit:
The drain line kit includes a drain valve, hose and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access like the wheel well opening or bumper area. If you select this option you can not also use the Magnetic Drain Plug.
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
Product Features:
» Show Quality Finish
» Can measures 6.00" x 3.00"
» Easy 20-30 minute install
» Vents oil vapor to a single tank
» -8, -10, -12 or 5/8" PNP fittings available
» Improves Performance by venting crankcase pressure
» High Quality CNC Machined Billet Aluminum
» Available in Single or Dual Port, Satin Silver or Black - Select Above
» Can measures 6.00" x 3.00"
» Easy 20-30 minute install
» Vents oil vapor to a single tank
» -8, -10, -12 or 5/8" PNP fittings available
» Improves Performance by venting crankcase pressure
» High Quality CNC Machined Billet Aluminum
» Available in Single or Dual Port, Satin Silver or Black - Select Above
Fits These Vehicles:
1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 GT LX 5.0L 4.6L GT500 Cobra Mustang Mach 1 Bullitt Shelby Roush & Saleen Vehicles.
As well as Universal applications.
Made in the USA!
